<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title>新闻中心</title>
<link>http://www.sjrclsbc.com/html/list_3_1.html</link>
<description>新闻中心</description>
<language>zh-cn</language>
<generator><![CDATA[Copyright &amp;copy; 2017-2022 SJRCLSBC.COM 哈尔滨松江电炉热处理设备厂 版权所有  相关搜索：哈尔滨电炉厂]]></generator>
<webmaster>desdev@vip.qq.com</webmaster>
<item>
    <title><![CDATA[哈尔滨井式回火炉在使用时需要注意以下八处问题]]></title>
    <link>http://www.sjrclsbc.com/html/101.html</link>
    <description><![CDATA[1）检查井式电炉的炉门或炉盖旁闭市的限位开关，应确保炉门或炉盖起动后，主回路断电。 2）井式电炉在使用前应确保电源接头触摸良好。电源线绝缘符合要求。 3）操控气氛电阻炉]]></description>
    <pubDate>2018-10-25</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉布袋除尘器的特点]]></title>
    <link>http://www.sjrclsbc.com/html/100.html</link>
    <description><![CDATA[通过许多企业多年使用布袋除尘器的实际作用来看，进步其除尘的功率所要做的环节有许多榜首首先要肯定确保布袋除尘器本体的密封问题，就是说体系内不能能漏气的现象。 在整个布]]></description>
    <pubDate>2018-10-24</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解电炉丝与镍铬丝的区别在哪里]]></title>
    <link>http://www.sjrclsbc.com/html/99.html</link>
    <description><![CDATA[镍铬丝首要化学成分为镍和铬，形状为丝状，因而被称作镍铬丝。镍铬丝又名镍铬元线，镍铬丝按截面形状可分为镍铬园丝、镍铬扁丝等。 镍铬丝具有较高的电阻率，外表抗氧化性好，]]></description>
    <pubDate>2018-10-20</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂带你了解台车式电炉]]></title>
    <link>http://www.sjrclsbc.com/html/98.html</link>
    <description><![CDATA[台车式电炉是国家标准节能型周期式作业炉，超节能结构，选用纤维结构，节电高达60%。独家生产选用复合式高铝瓷钉组，台车防碰击密封砖，主动密封台车和炉门，一体化连轨，不需]]></description>
    <pubDate>2018-10-15</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂告诉你井式电炉在使用时需要注意以下八点]]></title>
    <link>http://www.sjrclsbc.com/html/97.html</link>
    <description><![CDATA[1）检查井式电炉的炉门或炉盖旁闭市的限位开关，应确保炉门或炉盖起动后，主回路断电。 2）井式电炉在运用前应确保电源接头触摸杰出。电源线绝缘符合要求。 3）操控气氛电阻炉装]]></description>
    <pubDate>2018-10-13</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解井式电炉的六大特点]]></title>
    <link>http://www.sjrclsbc.com/html/96.html</link>
    <description><![CDATA[1、电炉设有大型通风机设备，进步炉内温度均匀度； 2、电炉分多区操控，进一步进步炉温均匀性； ​ 3、炉膛内带不锈钢导风桶； 4、炉盖启闭选用行车起吊或主动液压开闭组织，且]]></description>
    <pubDate>2018-10-12</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂浅析台车炉燃烧装置的选择]]></title>
    <link>http://www.sjrclsbc.com/html/95.html</link>
    <description><![CDATA[选用不同台车炉大型的焚烧设备决议着炉型结构。煤气烧嘴或油嘴在彼此转变炉大型时，对炉型结构影响不大，但煤炉造型时随焚烧设备的不同却有根本性的改变。 选用人工加煤的一般]]></description>
    <pubDate>2018-09-29</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉发生器的五点操作注意事项]]></title>
    <link>http://www.sjrclsbc.com/html/94.html</link>
    <description><![CDATA[1、机械安全阀，当压力超越预订压力值时，安全阀主动翻开排降压。 2、防爆膜设备，当压力超越预订压力时 ，防爆膜决裂，由防爆膜孔排汽降压。 3、低水位操控维护，当井式炉发生]]></description>
    <pubDate>2018-09-28</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉对耐热钢基本要求的说明]]></title>
    <link>http://www.sjrclsbc.com/html/93.html</link>
    <description><![CDATA[耐热钢是在高温下不易氧化，并具有必定高温机械强度的特殊钢种。它首要用作井式炉的炉罐、底板、柑祸等构件。耐热钢基本上能够分为抗氧化钢和热强钢两大类: 1.抗氧化钢即在高温]]></description>
    <pubDate>2018-09-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉的技术发展趋势]]></title>
    <link>http://www.sjrclsbc.com/html/92.html</link>
    <description><![CDATA[哈尔滨井式回火炉结构进行参数化和变量化的技能发展趋势 哈尔滨井式回火炉对功用模块自身的结构进行参数化和变量化，传统的模块化规划是在进行产品功用分析的根底上，将产品的]]></description>
    <pubDate>2018-09-20</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉回火的高效作用]]></title>
    <link>http://www.sjrclsbc.com/html/91.html</link>
    <description><![CDATA[回火炉的回火有一些高效的效果，它的效果之所以具有这些成效，是因为温度升高时，原子活动能力增强，钢铁中的铁、碳和其他合金元素的原子能够较快地进行分散，完成原子的从头]]></description>
    <pubDate>2018-09-19</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂井式炉测量放线工作有哪些要求]]></title>
    <link>http://www.sjrclsbc.com/html/90.html</link>
    <description><![CDATA[全面查询井式炉施工现场深度范围内的地上、地下障碍物，拟定扫除障碍物计划和处理计划，井加以施行。堵截一切施工现场基坑范围内的给水管道，移走地埋电缆等障碍。开挖过程中]]></description>
    <pubDate>2018-09-19</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉炉口砂封装置平台结构]]></title>
    <link>http://www.sjrclsbc.com/html/89.html</link>
    <description><![CDATA[砂封设备是井式炉密封办法的一项组成部分。当炉膛为负压时，可避免冷空气吸入;当炉膛为正压时，则避免高温炉气外逸。此外还可隔绝炉内热辐射，对维护台车金属构件不被烧坏及避]]></description>
    <pubDate>2018-09-18</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂燃气式真空炉的特点]]></title>
    <link>http://www.sjrclsbc.com/html/88.html</link>
    <description><![CDATA[（1）和电热式真空炉相同可以进行退火、淬火、回火等热处理。 （2）因为采用辐射管烧嘴，与电热式比较，燃料费用可节省2／3。 （3）CO2的排放量与电热式比较可削减40％。 （4）台]]></description>
    <pubDate>2018-09-18</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂电炉的节能和环保并重]]></title>
    <link>http://www.sjrclsbc.com/html/87.html</link>
    <description><![CDATA[砌筑将向全体化和轻型化方向开展。跟着不定形耐火材料的开展，全体浇注和轻型结构将获更广泛的开展。选用新式耐火材料，用耐高温陶瓷和陶瓷纤维代替耐火砖，使炉子升温快，热]]></description>
    <pubDate>2018-09-17</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解台车炉外壳组成及说明]]></title>
    <link>http://www.sjrclsbc.com/html/86.html</link>
    <description><![CDATA[一般台车炉外壳由钢板和型钢焊接而成，炉体底部与台车轻轨连为一体，用户不需要根底装置，只须放于平整的水泥地上即可运用，电炉炉衬资料选用超轻质0.6g/cmЭ节能耐火保温砖砌筑]]></description>
    <pubDate>2018-09-17</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂带您了解台车炉性能特点]]></title>
    <link>http://www.sjrclsbc.com/html/85.html</link>
    <description><![CDATA[恒力台车炉功能特色 (一)台车炉 1、本台车炉首要用于金属零件正火、调质、回火等热处理之用。 2、台车炉壳体由型钢和钢板焊接而成，外形漂亮巩固。 3、炉衬资料选用硅酸铝纤维结]]></description>
    <pubDate>2017-12-05</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解氮化炉的优点与结构]]></title>
    <link>http://www.sjrclsbc.com/html/84.html</link>
    <description><![CDATA[恒力氮化炉的长处与结构 一、渗速快 保温时间：8～10小时，渗层深度：0.14~0.18mm,白亮层：0.006~0.01mm 二、装炉量大、加工本钱低 氮化炉选用低真空变压技能，在低真空和变压的环境下完]]></description>
    <pubDate>2017-12-05</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您叙述钢丝氢气罩式退火炉退火工艺]]></title>
    <link>http://www.sjrclsbc.com/html/83.html</link>
    <description><![CDATA[0 导言 钢丝氢气罩式退火炉具有出产效率高、退火产品质量优、介质和能量消耗低、削减环境污染等优点，是改进和进步钢丝产品质量的一种重要设备，罩式退火炉的主动操控体系是确]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您详细介绍大型台车式电阻炉的用途和结构]]></title>
    <link>http://www.sjrclsbc.com/html/82.html</link>
    <description><![CDATA[一、用处： 本大型台车式电阻炉首要大型锻件、结构件、金属机件等热处理 二、结构和简介： 台车炉由炉体（包含炉衬）、全纤维炉门、炉车、炉门起吊组织、炉车行走组织、加热元]]></description>
    <pubDate>2017-12-01</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解析燃气台车炉的用途与组成结构]]></title>
    <link>http://www.sjrclsbc.com/html/81.html</link>
    <description><![CDATA[气台车炉的用处：焊接件去应力退火; 燃气台车炉的组成：热处理炉工程首要由全纤维炉体、全纤维炉门、炉车、焚烧体系、排烟体系、密封体系、阀站及管路体系、自控体系和上位计]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解答台车炉热处理常见缺陷（四）]]></title>
    <link>http://www.sjrclsbc.com/html/80.html</link>
    <description><![CDATA[台车炉进行热处理工艺操作（淬火与回火）常常见缺点：淬火脱碳 该缺点产生原因如下： 1． 盐浴中，水、氧以及不纯物质（如硫酸盐、碳酸盐）的含量过高 2． 氧化铁皮落入炉内 3．]]></description>
    <pubDate>2017-11-30</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解答台车炉热处理时常见缺陷（三）]]></title>
    <link>http://www.sjrclsbc.com/html/79.html</link>
    <description><![CDATA[台车炉进行热处理工艺操作(淬火与回火)时的常见缺点：硬度低或软块 该缺点发生原因如下： 1． 淬火温度低，加热时刻短 2． 预热时刻过短，预热温度太低 3． 装炉量多，零件摆放过]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解答台车炉热处理时常见缺陷（二）]]></title>
    <link>http://www.sjrclsbc.com/html/78.html</link>
    <description><![CDATA[台车炉进行热处理工艺操作（淬火与回火）常常见缺点：过热和过烧 该缺点发生的原因如下： 1． 淬火温度过高 2． 控温外表失灵，或示值禁绝 3． 零件距台车炉电极太近或接近电阻丝]]></description>
    <pubDate>2017-11-29</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解答台车炉热处理时常见缺陷（一）]]></title>
    <link>http://www.sjrclsbc.com/html/77.html</link>
    <description><![CDATA[台车炉进行热处理工艺操作（淬火与回火）时的常见缺点：腐蚀 该缺点发生的原因： 1． 盐浴中含有杂质太多如Na2SO4，HCl等 2． 盐浴中混入硝盐，分解出原子氧，与刀具效果发生麻点]]></description>
    <pubDate>2017-11-28</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您解析金属热处理工艺全过程]]></title>
    <link>http://www.sjrclsbc.com/html/76.html</link>
    <description><![CDATA[热处理工艺一般包括加热、保温、冷却三个进程，有时只要加热和冷却两个进程。这些进程相互联接，不行连续。 加热是热处理的重要过程之一。金属热处理的加热办法许多，最早是选]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂告诉你油嘴点火不燃的原因有哪些？]]></title>
    <link>http://www.sjrclsbc.com/html/75.html</link>
    <description><![CDATA[发生焚烧不燃的原因主要有： 1） 油管中没有油。 2） 配管中进了水、油泥、粘度过大。 3） 油的闪点过高。 4） 烧嘴孔眼被阻塞。 5） 燃油加热温度不行。 6） 风门未开，没有空气。]]></description>
    <pubDate>2017-11-27</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解井式气体氮化电炉的用途与结构]]></title>
    <link>http://www.sjrclsbc.com/html/74.html</link>
    <description><![CDATA[用 途 RN2系列井式气体氮化炉属规范节能型周期作业炉。首要供各种钢制机械零件、轿车曲釉、 摩托车刹车片、模具等进行气体氮化热处理之用。 结构简介 ​ RN2系列井式气体氮化炉属]]></description>
    <pubDate>2017-11-27</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉热处理设备厂告诉您双头台车式电阻炉的用途]]></title>
    <link>http://www.sjrclsbc.com/html/73.html</link>
    <description><![CDATA[用处：各种金属机件和资料的回火、淬火、预热等热处理 特色： ​ 1、电炉设有热风循环设备使炉温均匀，工件受热均匀； 2、电炉装载量大、生产率高，适用于各种类型的 机件回火、]]></description>
    <pubDate>2017-11-20</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂告诉您井式电阻炉的七个特点]]></title>
    <link>http://www.sjrclsbc.com/html/72.html</link>
    <description><![CDATA[1. 结构设计合理，炉温均匀，作业区上下温差小，特别适合于轴类长形工件的加热及热处理。 2. 选用节能炉衬，升温快，空炉丢失小，较老产品节能20%以上。 3. 炉盖设开式和整体式两]]></description>
    <pubDate>2017-11-20</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解大型井式电阻炉的六大用途]]></title>
    <link>http://www.sjrclsbc.com/html/71.html</link>
    <description><![CDATA[1、电炉设有大型通风机设备，提高炉内温度均匀度； 2、电炉分多区控制，进一步提高炉温均匀性； 3、炉膛内带不锈钢导风桶； 4、炉盖启闭选用行车起吊或主动液压开闭组织，且带有]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂告诉您氮化炉的技术特点]]></title>
    <link>http://www.sjrclsbc.com/html/70.html</link>
    <description><![CDATA[一、渗速快 保温时刻：８～１０小时，渗层深度：0.14~0.18mm,白亮层：0.006~0.01mm 二、外表硬度高 外表硬度可达HV1000~1200 ​ 三、装炉量大、加工本钱低 选用低真空变压技能，在低真空和]]></description>
    <pubDate>2017-11-17</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂告诉您井式气体氮化炉的产品用途]]></title>
    <link>http://www.sjrclsbc.com/html/69.html</link>
    <description><![CDATA[井式气体氮化炉的产品用处： 本系列井式气体快速氮化炉系周期功课炉，是我厂在消化吸收国外德古沙公司同类产品的基础上研制开发的现在海内最进步长辈的软氮化处理设备。井式气]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉厂为您讲解井式氮化炉的特点]]></title>
    <link>http://www.sjrclsbc.com/html/68.html</link>
    <description><![CDATA[1、电炉设有热风轮回设备，可使炉罐内的气氛及温度均匀； 2、因设有气氛维护，所以作业无变形、无氧化，节省原材料； ​ 3、炉罐盖的升降选用电动液压设备，炉罐盖升降平稳、无]]></description>
    <pubDate>2017-11-16</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂为您讲解井式电阻炉的六大特点]]></title>
    <link>http://www.sjrclsbc.com/html/67.html</link>
    <description><![CDATA[1、电炉设有大型透风机设备，前进炉内温度均匀度； 2、电炉分多区操控，进一步前进炉温均匀性； 3、炉膛内带不锈钢导风桶； 4、炉盖启闭选用行车起吊或主动液压开闭机构，且带有]]></description>
    <pubDate>2017-11-15</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉热处理设备厂告诉您井式环件淬火炉的用途及设备结构]]></title>
    <link>http://www.sjrclsbc.com/html/66.html</link>
    <description><![CDATA[一、井式环件淬火炉的用途 井式环件淬火炉是周期功课炉，首要用于各种加工件、环件热处理。 二、井式环件淬火炉的技术参数 1、 额外功率：560KW10% 2、 额外温度：1000℃ 3、 额外电]]></description>
    <pubDate>2017-11-15</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[松江电炉热处理设备厂告诉您井式环件炉的结构]]></title>
    <link>http://www.sjrclsbc.com/html/65.html</link>
    <description><![CDATA[井式环件炉的结构：是由炉体和一个可移动的炉盖及操控系统组成. 1、炉体外壳选用型钢及钢板焊接成框架结构. 2、炉盖支承选用槽钢和导轨组合移动式。 ​ 3、经过我们长期的出产经]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂为您讲解台车炉设计要求]]></title>
    <link>http://www.sjrclsbc.com/html/64.html</link>
    <description><![CDATA[台车炉规划要求 台车炉是标准型台车电阻炉，外壳由钢板和型钢焊接而成，炉体底部与台车轻轨连为一体，用户不需要根底装置，只须放于平坦的水泥地上即可运用，电炉炉衬资料选用]]></description>
    <pubDate>2017-11-14</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉热处理设备厂为您讲解井式气体渗碳电炉的用途及结构]]></title>
    <link>http://www.sjrclsbc.com/html/63.html</link>
    <description><![CDATA[用处 RQ3系列井式气体渗碳电阻炉是新标准节能型周期作业式热处理电炉， 首要供钢制零件气体渗碳用， 因为选用超节能炉衬和国际先进的真空密封风机，使炉压进步， 无任何漏气，]]></description>
    <pubDate>2017-11-13</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨松江电炉热处理设备厂为您讲解井式回火炉的用途及结构]]></title>
    <link>http://www.sjrclsbc.com/html/62.html</link>
    <description><![CDATA[用处 RJ2系列井式回火电阻炉系节能型周期作业式电炉，供一般金属机件在空气中进行回火以及铝合金压铸件、活塞、铝板等轻合金机件淬火、退火、时效热处理之用。 结构简介 RJ2系列]]></description>
    <pubDate>2017-11-13</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂告诉您热处理是怎么一回事]]></title>
    <link>http://www.sjrclsbc.com/html/61.html</link>
    <description><![CDATA[金属热处理是将金属工件放在必定的介质中加热到适合的温度，并在此温度中坚持必定时刻后，又以不同速度冷却的一种工艺办法。 金属热处理是机械制造中的重要工艺之一，与其它加]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂厂家告诉您台车式退火炉的炉型结构]]></title>
    <link>http://www.sjrclsbc.com/html/60.html</link>
    <description><![CDATA[台车式退火炉主要由炉体（包含炉门）、炉衬、炉门升降及密封设备、炉车、炉车传动组织、电加热设备、温度操控及记载体系等主要部分组成。不需基础设备，放在水平地上即可运用]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂给您讲解一些电炉知识]]></title>
    <link>http://www.sjrclsbc.com/html/59.html</link>
    <description><![CDATA[电炉是把炉内的电能转化为热量对工件加热的加热炉，同燃料炉比较，电炉的长处有：炉内气氛简略操控，乃至可抽成真空；物料加热快，加热温度高，温度简略操控。 长处 电炉是把]]></description>
    <pubDate>2017-10-14</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨井式回火炉的工艺操作]]></title>
    <link>http://www.sjrclsbc.com/html/58.html</link>
    <description><![CDATA[1、井式回火炉开炉前的预备 （1）查看电器操控箱和炉内是否有能引起电源漏电的风险东西，并予以取出。 （2）合闸后查看操控箱内的电器和外表作业是否正常，并翻开外表开关，使]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[ 哈尔滨热处理设备厂给您简单介绍热处理设备的结构]]></title>
    <link>http://www.sjrclsbc.com/html/57.html</link>
    <description><![CDATA[台车炉炉底为可移动的台车用于装载工件。承载才能较其他工业炉更强，能装载大型、重型工件作热处理。加热前，装料台车先开出炉膛外，可用车间熟行吊或各种方式装料，热处理工]]></description>
    <pubDate>2017-10-14</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂家告诉您电炉具有哪些特性？]]></title>
    <link>http://www.sjrclsbc.com/html/56.html</link>
    <description><![CDATA[电炉具有的长处 1） 与燃料炉比较简单得到高温。 2） 可从资料内部加热使其升温。 3） 便于在可控气氛炉和真空炉中运用。 4） 电炉没有燃料炉的排烟热丢失，所以热效率高。 5） 简]]></description>
    <pubDate>2017-10-14</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[哈尔滨电炉厂教你渗碳炉的正确使用方法]]></title>
    <link>http://www.sjrclsbc.com/html/55.html</link>
    <description><![CDATA[哈尔滨电炉厂作为专业的渗碳炉厂家，说说它的正确使用方法。由于渗碳炉罐的外侧接近电热元件，温度较高，可达950一l000度，所以要求渗碳炉罐具有良好的抗氧化性;渗碳炉罐的内侧]]></description>
    <pubDate>2018-04-26</pubDate>
    <category>新闻中心</category>
    <author>admin</author>
    <comments>未知</comments>
</item>

</channel>
</rss>
